Saving and Reusing Copy Settings
You can save one set of custom copy settings so you can quickly reuse it for a
similar copying job (for example, 5 × 7-inch photos on Premium Glossy Photo
paper). You can then "reprint" photos by pressing a single button.
1. After selecting settings, press and hold the
The current setting has been saved on the LCD screen
If you want to save a different group of settings, repeat step 1. This replaces
your previously saved settings.
2. To use your saved settings, press the
the RX600 screen. Then press
Canceling Copies
To cancel a job in progress, press the y
RX600 screen and your page is ejected.
Restoring Default Settings
If you want to reset copy and print settings to their original default settings, follow
these steps:
1. Press the
Setup
2. Use the u and d buttons to choose
3. Press
, then press
OK
4. You see a confirmation message that settings have been restored. Press
OK
button.
again to restore your settings.
OK
button until you see
Recall
button until you see
Recall
.
button.
Stop
Canceling
Restore to Factory Settings
Copying Without a Computer
. Then press
.
OK
on
Recalled
appears on the
.
.
OK
29