Epson Stylus Photo RX600 User Manual page 113

If you are printing from film, wait for the scanner to preview your photos,
and use the l and r buttons to choose your photo. Then press the
button.
5. Press the u and d buttons to highlight
buttons to choose the type of paper that is loaded in the printer. (If you're not
sure about the paper type, see the table on page 91.)
Note:
It's important to select the correct Paper Type setting for the paper you're using, or
the print quality may not be what you expect.
6. Press the u and d buttons to highlight
buttons to select the size of paper you've loaded.
7. Use the u and d buttons to highlight
to select one of the following:
BorderFree
on the paper.
With Border
Upper 1/2
or slides)
: two photos per sheet (not available for film or slides)
2-up
: four photos per sheet (not available for film or slides)
4-up
: eight photos per sheet (not available for film or slides)
8-up
: 20 photos per sheet (not available for film or slides)
20-up
8. Use the u and d buttons to highlight
buttons to choose
.
Photo
9. If you are printing from a memory card, you can make further changes before
printing. Use the u and d buttons to choose any of the options listed on
page 92.
10. If you are printing from film or slides, you can restore the color from faded
images. Use the u and d buttons to highlight
l and r buttons to choose
11. When you're done adjusting print settings, press the
: one photo per sheet, borderless; fits the photo lengthwise
: one photo per sheet, with borders around the edges.
: one photo on the top half of the sheet (not available for film
(not available for film or slides),
Normal
.
On
, then press the l and r
Paper Type
, then use the l and r
Paper Size
, then use the l and r buttons
Layout
, then use the l and r
Resolution
Restoration
OK
Cropping Your Photos
OK
, or
Photo Best
, then use the
button.
113