Epson Stylus Photo RX600 User Manual page 18

3. Load up to 10 envelopes at a time—short edge first, flap edge left, and
printable side up. Place them against the right edge of the sheet feeder, behind
the tab.
Note:
Do not place the envelopes in front of the feeder guard.
4. Press the sides of the left edge guide together and slide it against the envelopes
(but not too tightly).
Note:
For best results, press each envelope flat before loading, or load one envelope at a
time. Avoid envelopes that are too thin; they may curl during printing.
Select the following settings when printing on envelopes:
Plain paper
The correct envelope size as the Size (Windows) or Paper Size (Macintosh)
setting
Landscape
For instructions on selecting these settings, see:
"Printing in Windows" on page 36
"Printing on a Macintosh" on page 43
18
Loading Paper
as the Type (Windows
as the Orientation setting
Load envelopes
short edge first,
printable side up,
and flap edge left
® ) or Media Type (Macintosh ® ) setting