Rx600 Screen Problems; Uninstalling Your Software - Epson Stylus Photo RX600 User Manual

A dotted line appears in the image.
If this happens on both your screen and printout, clean the scanner glass with
a soft, dry, lint-free cloth (paper towels are not recommended). If the glass is
still not clean, use a small amount of glass cleaner on a soft cloth. Make sure
you wipe off any remaining cleaner. Don't spray glass cleaner directly on the
glass.
If the line is just on your printout, you may need to clean your print head, see
page 129.

RX600 Screen Problems

You can't read the menus or view photos on the RX600 screen.
You may need to adjust the RX600 screen contrast setting. Press the
button to set the RX600 to Setup mode. Press the d button to select
Contrast Adjustment
to adjust the contrast, then press the
The RX600 screen may be in sleep mode to protect the screen. If you see a
message floating on the screen, press any button on the RX600 to wake the
screen. Then press the button for the task you want to perform.

Uninstalling Your Software

You may need to uninstall and then reinstall your printer driver and utilities if, for
example, you upgrade your operating system. You don't need to uninstall
PhotoImpression or your on-screen Reference Guide. Follow the instructions in
these sections:
"Windows" on page 154
"Macintosh OS X" on page 155
"Macintosh OS 9" on page 156
, then press the
OK
OK
button. Use the l and r buttons
button.
Uninstalling Your Software
Setup
LCD
153