Saving and Reusing Print Settings
You can save one set of custom print settings so you can quickly reuse it for a
similar printing job (for example, 5 × 7-inch photos on Premium Glossy Photo
paper). You can then "reprint" photos by pressing a single button.
After selecting settings, press and hold the
current setting has been saved on the LCD screen
button.
To use your saved settings, press the
the RX600 screen, then press the
If you want to save a different group of settings, repeat step 1. This will replace
your previously saved settings.
Restoring Default Settings
If you want to reset print and copy settings to their original default settings, follow
these steps:
1. Press the
Setup
2. Use the u and d buttons to choose
3. Press
, then press
OK
4. You see a confirmation that settings have been restored. Press the
OK
button.
again to restore your settings.
OK
button until you see
Recall
button until you see
Recall
button.
Restore to Factory Settings
Printing Your Selected Photos
The
, then press the
OK
Recalled
.
button.
OK
on
93