Selecting Special Print Settings - Epson Stylus Photo RX600 User Manual

Selecting Special Print Settings

If necessary, use the u and d buttons to choose the special print settings listed
below, then use the l and r buttons to change them.
: Choose
Filter
Auto Correct: P.I.M.
Exif Print settings (these options are automatically selected when your pictures
contain P.I.M. or Exif data).
and saturation of your photos.
Small Image
phones and low-resolution PDAs, set this option to
option
Off
Brightness
Contrast
Sharpness
Saturation
for softer colors.
Least
: Prints the date with your photo in one of the following formats:
Date
yyyy.mm.dd
dd.mmm.yyyy
: Prints the time with your photo in one of these formats:
Time
system
Print Info
F-stop (aperture), and ISO speed.
Fit to Frame
on your selected layout, part of the image will be automatically cropped. Set
this option to
space at the edges of the photo).
Cropped area
Bidirectional
92
Printing and Scanning Without a Computer
to print your photos with a sepia (brown) tone.
Sepia
and
: To boost the appearance of small images taken from mobile
when printing most photos, or your printer will print slowly.)
: If your prints are too dark or bright, adjust this setting.
: To increase the contrast, choose
: Adjust this setting to sharpen or soften your prints.
: Choose
More
(2004.12.12),
(12.Dec.2004), or
(9:00),
24-hour system
: Set this to to print your camera's exposure time (shutter speed),
On
: If your photo is too long or wide to fit inside the available space
if you want to turn off automatic cropping (leaving white
Off
: Set this to
On
use your camera's PRINT Image Matching or
Exif
PhotoEnhance
High
or for stronger colors, or choose
Most
mmm.dd.yyyy
(no date).
None
(21:00), or
Fit to Frame
turned on
if you want to print at a higher speed.
adjusts the brightness, contrast,
. (Be sure to turn this
On
or
Super High
(Dec.12.2004),
(no time printed).
None
.
or
Less
12-hour
Fit to Frame
turned off