Epson Stylus Photo RX600 User Manual page 130

3. Press the u and d buttons to select
4. Press the
Cleaning takes about 30 seconds, during which the message
appears on the RX600 screen.
Caution:
Never turn off the Stylus Photo RX600 while the message Head Cleaning appears
on the RX600 screen, unless the Stylus Photo RX600 hasn't moved or made noise
for more than 5 minutes.
5. When head cleaning is finished, you return to the Setup Menu. Use the
u and d buttons to select
6. Make sure letter-size paper is loaded. Press the
print a nozzle check.
Note:
You can also print a nozzle check using the printer software. Click the ? or Help
button on your printer settings window for instructions on printing a nozzle check.
7. Examine the nozzle check pattern you printed. Each staggered line should be
solid, with no gaps, as shown.
If your printout looks okay, you're done. Click
main menu.
If you see any gaps (as shown below) in the dot pattern, press
follow the instructions on the RX600 screen to clean the print head again.
130
Maintaining the RX600
button, then press
OK
Nozzle Check
Head cleaning
to start cleaning the print head.
OK
.
OK
.
Head Cleaning
button, then press
to return to the
Cancel
OK
to
OK
. Then