Appendix 2
The Universal model QCPU is upgraded when some functions are added or specifications are changed. Therefore, the
functions and specifications differ depending on the function version and serial number.
Function
*1
Use of the PC CPU module
(
System))
Setting of whether to use local device for each program (
Section 6.2)
Program memory batch transfer execution status check (SM165)
(
Page 36, Section 2.1.1 (1) (d))
Multiple CPU high-speed transmission dedicated instruction
(
MELSEC-Q/L Programming Manual (Common Instruction))
Display of the amount of battery consumption (
(Hardware Design, Maintenance and Inspection))
Bit device extension (
Page 343, Section 4.2)
Executional conditioned device test (
*1
Sampling trace auto start function
CC-Link IE group cyclic transmission function (
Network Reference Manual)
Scan time measurement (
Page 181, Section 3.13.3)
External input/output forced on/off (
*1
Monitor condition setting
(
*1
Redundant power supply system
32-bit indexing with "ZZ" specification (
Manual (Common Instruction))
Extended data register (D) and extended link register (W)
400, Section 4.8)
Serial communication function (Q02UCPU) (
CPU module change function with memory card
3.31)
Local device setting of the index register
1.2.8)
Communication using the A-compatible 1C/1E frame (MC protocol)
(
MELSEC Communication Protocol Reference Manual)
A QnA converted special relay/special register (SM1000 to SM1255,
SD1000 to SD1255) (
QCPU User's Manual (Hardware Design,
Maintenance and Inspection))
*1
Socket communication function
(
(Communication via Built-in Ethernet Port))
Functions Added or Changed by Version
Upgrade
QCPU User's Manual (Multiple CPU
Page 420,
*1
QCPU User's Manual
Page 159, Section 3.11.4)
(
Page 184, Section 3.14)
CC-Link IE Controller
Page 154, Section 3.11.3)
Page 146, Section 3.11.1)
(
Page 441, Appendix 1.2.4)
MELSEC-Q/L Programming
*1 *2
(
Page
Page 232, Section 3.23)
*1
(
Page 259, Section
*1
(
Page 446, Appendix
*3 *4
QnUCPU User's Manual
× : Not supported,
: Not related to the programming tool
–
Function
Serial number
version
(first 5 digits)
"09072" or later
*6
"10042" or later
B
*1
"09042" or later
"10102" or later
"10102" or later
"11012" or later
APPENDICES
Programming tool version
GX Works2
GX Developer
–
Version 8.62Q
or later
–
Version 1.15R
or later
Version 8.68W
or later
Version 1.73B
or later
Version 8.70Y
or later
Version 1.15R
Version 8.76E
or later
or later
Version 8.78G
or later
465
A