Removing The Cosmetic Cover; Removing The Inside Cables - Canon CXDI-80C Service Manual

3.3.2 Removing the cosmetic cover

Remove the four M3L6 brazier head hexagon socket bolts (XA9-2036) on the front panel of the
AC/DC box, and remove the cosmetic cover of the box.
* By removing the cosmetic cover, it is possible to access the screws used to make the
connection between the AC/DC power supply and AC/DC box base.
M3L6 brazier head hexagon socket bolts
(XA9-2036) (x 4)
Reference:
Tightening torque: 58.8 N-cm (6 kgf-cm)

3.3.3 Removing the inside cables

1) Disconnect the AC socket cable connector from the AC/DC power supply.
2) Detach the power cable assembly that connects the AC/DC power supply and PCA-PB board,
disconnect the connectors at both ends of the cable, and remove the cable.
3) Remove the screw (XB1-2300-806) used to fasten both the cable clamp and the PCA-PB
board.
* Do not pull the cables free in order to disconnect the connectors.
AC/DC power supply
AC socket cable
Tie the cables together from
above the protective tube.
Cable tie as seen from view A
4. Repair Guide
Cosmetic cover
View A
- 8 -
AC/DC box base
Power cable assembly
XB1-2300-806（x 1） XB1-2300-806 screw (x 1)
Cable clamp
cable clamp (and board)
PCA-PB board
PCA-PB board
AC/DC
power
supply
Screw used to fasten
as seen from above