Toro Reelmaster 5510 Operator's Manual page 28

Accessing Protected Menus
Note:
The factory default PIN code for you machine
is either 0000 or 1234.
If you changed the PIN code and forgot the code,
contact your authorized Toro distributor for assistance.
1. From the M M
AIN
scroll down to the S
right button (Figure
Figure 44
2. In the S M
ETTINGS
scroll down to the P
the right button (Figure
Figure 45
3. To enter the PIN code, press the center button
until the correct first digit appears, then press
the right button to move on to the next digit
(Figure 45B and
until the last digit is entered and press the right
button once more.
, use the center button to
ENU
M and press the
ETTINGS ENU
44).
, use the center button to
ENU
M and press
ROTECTED ENU
45A).
Figure 45C). Repeat this step
4. Press the middle button to enter the PIN code
(Figure 45D).
Wait until the red indicator light of the InfoCenter
illuminates.
Note:
If the InfoCenter accepts the PIN code
and the protected menu is unlocked, the word
"PIN" displays in the upper right corner of the
screen.
Note:
Rotate the key switch to the O
then to the O
N
Viewing and Changing the
Protected Menu Settings
1. In the Protected Menu, scroll down to Protect
Settings.
2. To view and change the settings without entering
a PIN code , use the right button to change the
g028523
Protect Settings to O
3. To view and change the settings with a PIN
code, use the left button to change the Protect
Settings to O
key in the ignition switch to the O
then to the O
Setting the Service Due Timer
The service due timer resets the service due
hours after a scheduled maintenance procedure is
performed.
1. In the Settings Menu, use the center button to
scroll down to the P
the right button.
2. Enter PIN; refer to Accessing Protected Menus
on the Operator's Manual for your machine.
3. In the Service Menu, navigate to the H
M .
ENU
4. Scroll down to the service symbol
Note:
If service is currently due, the first icon
shows N
OW
5. Below the first icon is the service interval item
(time interval, e.g. 250, 500, etc.)
g028522
Note:
Service interval is a protected menu item.
6. Highlight the service interval and press the right
button.
7. When the new screen appears, confirm R
S H
ERVICE
8. Select Y
ES
9. After you select Y
and reverts back to the Service Hours selections.
28
position locks the protected menu.
.
FF
, set the PIN code, and turn the
N
position.
N
M
ROTECTED
.
—A Y S
OURS RE OU URE
(center button) or N
O
the interval screen clears,
ES
position and
FF
position and
FF
and press
ENU
OURS
.
ESET
?
(left button).