Usage Recommendations - Silvercrest SBP 1960 A1 Operating Instructions Manual

♦
Place the hanger 1 on the telescopic shaft 4 so that the curved arms face
the front of the appliance . Push the locking stud 2 in and slide the hanger 1
over it until the locking stud 2 engages (Fig . 1) .
Fig . 1: Attaching the hanger 1
NOTE
► To remove the hanger 1 if necessary, push the locking stud 2 in and pull
the hanger 1 upwards .
♦
Now pull the nylon balloon e over the hanger 1 . Pull the elastic drawstring at
the bottom of the nylon balloon e over the top edge of the cable retainer w .
♦
Insert the plug into a suitable mains socket .
The appliance is now ready for use .

Usage recommendations

■ Suitable materials are cotton, linen, silk and flannel .
■ Stretchable, knitted and crocheted garments and woollen clothing are not
suitable . Stretchable garments could lose their shape .
■ The clothes to be dried should have been spun at at least 400 revolutions
per minute in the washing machine . Do not allow machine-spun clothes to
dry first . The textiles should only be damp, not dripping wet!
■ The drying process for a machine-spun shirt takes approx . 10 minutes .
However, the duration may vary depending on the material and moisture
content . Longer drying times may be necessary, especially for heavier
fabrics .
■ To protect your clothes, always start with a shorter drying time and extend it
if necessary .
SBP 1960 A1 GB │ IE │ NI │ 9 ■