Operation - Silvercrest SBP 1960 A1 Operating Instructions Manual

Operation

WARNING! RISK OF INJURY!
► Parts of the appliance get hot during use . Risk of burns!
CAUTION! PROPERTY DAMAGE!
► Do not insert anything into the blower 6 in the housing of the appliance
base 0 and do not cover it .
NOTE
► A slight odour may develop during the first applications . This is harmless to
health and does not represent a fault in the appliance .
♦
Adjust the nylon balloon e to fit the garment to be dried using the zips:
–
For smaller clothing items, the side zips should be closed on both sides .
For larger garments, the side zips should be opened .
–
If you want to dry a hooded top, open the zip on the neck of the nylon
balloon e . Close this zip for hoodless clothing .
♦
Pull the garment to be ironed onto the nylon balloon e and smooth it out .
Make sure that . . .
–
the collar of the garment is correctly positioned over the neck of the
hanger 1,
–
the hood hangs over the neck with the zip open,
–
the arms of the nylon balloon e are smooth and straight in the sleeves
of the garment,
–
all buttons (also on the sleeves) are done up,
–
the button strip lies centred over the row of holes on the nylon balloon e .
♦
Distribute the weight clamps q evenly over the lower hem of the garment .
They ensure that the clothing does not wrinkle or lose its shape during the
drying process .
♦
Turn the dial 9 clockwise until the LED 8 lights up with the desired drying
time . You have the choice between a minimum of 5 and a maximum of
30 minutes in steps of 5 minutes .
HINWEIS
► The maximum drying time is 30 minutes . If you turn the dial 9 further
than this, all LEDs 8 will be flashing for a few seconds .
■ 10 │ GB │ IE │ NI SBP 1960 A1