Cleaning - Silvercrest SBP 1960 A1 Operating Instructions Manual

The appliance starts the drying process . During operation, the LEDs 8 go out
one after the other, indicating the remaining drying time .
Fig . 2: Appliance in operation
NOTE
► Once the nylon balloon e is completely inflated, pull the garment
straight again and smooth it out .
► You can adjust the drying time as required during operation .
► To stop the drying process prematurely and to switch off the appliance,
turn the dial 9 anticlockwise until all the LEDs 8 have gone out .
♦
The appliance switches itself off automatically after the set drying time has
elapsed .
♦
Remove the garment carefully .
♦
Disconnect the power plug and allow the appliance and accessories to cool
completely before cleaning or storing them .

Cleaning

WARNING! RISK OF INJURY!
► Before cleaning the appliance, always remove the plug from the socket and
allow the appliance to cool down completely .
► Never immerse the appliance base 0, the mains cable or the mains plug in
water or other liquids!
CAUTION! PROPERTY DAMAGE!
► Do not use abrasive, aggressive or chemical cleaning agents . These can
irreparably damage the surface .
♦
Allow the appliance and accessories to cool completely .
SBP 1960 A1 GB │ IE │ NI │ 11 ■