Huawei ACBox2000-21-D0-A-US User Manual page 30

ACBox2000-21-D0-A-US
User Manual (U.S. Edition)
Figure 5-4 Peeling a cable
Step 2 Insert the exposed core wire into the crimping area of the OT terminal and crimp it using
hydraulic pliers.
Step 3 Remove the locking cap from the GND waterproof cable connector (waterproof connector for
short) at the bottom of the ACBox2000 and remove the plug from the locking cap.
Step 4 Route the ground cable into the locking cap and then the GND waterproof connector.
Step 5 Remove the bolt at the ground point.
Step 6 Use the bolt to secure the ground cable crimped with the OT terminal and tighten the bolt to a
torque of 8 N· m using a socket wrench.
Figure 5-5 Connecting a ground cable
Issue 01 (2016-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
25