Connecting An Ac Output Power Cable - Huawei ACBox2000-21-D0-A-US User Manual

ACBox2000-21-D0-A-US
User Manual (U.S. Edition)

5.7 Connecting an AC output power cable

Procedure
Step 1 Remove the AC OUTPUT waterproof connector from the bottom of the ACBox2000.
Step 2 Route the AC output power cable through the prepared cable routing pipe.
Step 3 Remove the insulation layer of the AC output power cable by an appropriate length using a
wire stripper.
Figure 5-10 Peeling a cable
Step 4 Remove the safety warning panels and insulation partitions from the load switch.
Figure 5-11 Removing safety warning panels and insulation partitions
Step 5 Connect the AC output power cable.
Issue 01 (2016-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
30