Bosch Rexroth ROTATRAC eGFT 8000 10 Series Manual page 51

Servicing and repair 51/64
If functional impairment or thermal overload makes repairs necessary, these must
only be performed by trained staff or employees of the Rexroth Service. The
corresponding contact is indicated in appendix A "Address directory" of the material
number-specific operating instructions. The disks, springs and sealing elements
always have to be replaced in such repair. Rexroth does not assume any liability for
damage of any kind due to non-observance of these provisions.
RE 79088-01-B/02.2019, ROTATRAC eGFT 8000 general operating instructions series 10, Bosch Rexroth AG