Preparing The Planetary Gearbox For Storage Reuse - Bosch Rexroth ROTATRAC eGFT 8000 10 Series Manual

29 Secure the planetary gearbox against uncontrolled movements, e.g. sliding.
30 Tighten the means of attachment without lifting the planetary gearbox. Make sure
that the planetary gearbox is not tilted.
31 Untighten and remove the mounting screws of the connection between machine
or chassis frame and planetary gearbox.
32 Lift the planetary gearbox carefully from the machine or chassis frame.
33 Make sure that the surface is stable.
34 Place the disassembled planetary gearbox vertically with the cover plate down on
appropriate squared timbers on a stable underground. Secure the planetary
gearbox against tipping over.
35 Remove all means of attachment such as eye bolts, straps, chains, swivel hooks,
shackles or devices which are still attached.

12.4 Preparing the planetary gearbox for storage reuse

This chapter only describes how to prepare the planetary gearbox for storage reuse.
For queries, please contact a Rexroth's subsidiary located near you or the main
plant directly. For the addresses of our national agencies, refer to
www.boschrexroth.com/addresses and the address directory in appendix
A "Address directory" of the material number-specific operating instructions.
1 Carefully close all the openings of the planetary gearbox.
2 Clean the planetary gearbox as described in chapter 10.1 "Cleaning and Care".
For preservation, fill the planetary gearbox with lubricating oil approved for this
3
planetary gearbox. See selection list– industrial gearbox oils in appendix B
"Required and supplementary documentations" in the material number-specific
operating instructions. Fill the planetary gearbox as described in chapter 8.1.2
"Filling the planetary gearbox with lubricating oil" in these operating instructions.
4 Preserve the surfaces of external flanges, shaft ends and flange surfaces with a
preservative (e.g. PERIGOL VCI 230 or CUSTOS 10-38). Observe chapter 6.2.1
"Preservation" and the associated product data sheets and safety data sheets.
5 Store the planetary gearbox as described in chapter 6 "Transport and storage".
RE 79088-01-B/02.2019, ROTATRAC eGFT 8000 general operating instructions series 10, Bosch Rexroth AG
Disassembly and replacement 57/64