Hitachi 3090 G2 Hardware Reference Manual page 104

Item Labels
3
4
5
6
5. If cables are not labeled, label them before removing them from the server.
6. Remove all cables from the server, and remove the server from the rack.
7. Remove the rail mounts from the old server, and install them on the new server.
8. Remove the battery from the old server, and install it in the new server.
9. Remove the bezel from the old server, and install it on the new server.
10. Insert the new server into the rack, and connect the power cords to the power
supplies.
Note: Do not make any other cable connections at this time.
Appendix A: Server replacement procedures
Hitachi NAS Platform 3080 and 3090 G2 Hardware Reference
Shutting down the servers you are replacing
Ports
4 Gigabit Ethernet network port
5 Gigabit Ethernet network port
6 Gigabit Ethernet network port
1 10/100 Private management network
Ethernet port
2 10/100 Private management network
Ethernet port
3 10/100 Private management network
Ethernet port
4 10/100 Private management network
Ethernet port
5 10/100 Private management network
Ethernet port
1 Storage or FC switch
2 Storage or FC switch
3 Storage or FC switch
4 Storage or FC switch
0 Customer facing management network
1 Private management network
Connections
104