Table of Contents
Advertisement
Procedure
1. Log in to the server.
2. Run the nas-preconfig script.
3. Reboot if you are instructed to by the script.
4. Log in to the SMU using one of the IP addresses you obtained once they can
successfully connect using ssc localhost.
5. Use a KVM (keyboard, video, and mouse) or a serial cable to connect to the serial
port on the server.
Alternatively, you can connect by way of SSH using the following settings:
115,200 b/s
■
8 data bits
■
1 stop bit
■
No parity
■
No flow control
■
VT100 emulation
■
6. Log in as root (default password: nasadmin), and enter ssc localhost to access
the BALI level command prompt.
7. Enter evs list to obtain the IP configuration for the server.
8. Using a supported browser, launch the NAS Manager using either of the IP
addresses acquired from the EVS list output.
9. Click Yes to proceed past the Security Alert, and log in as admin (default password:
nasadmin).
10. Verify and, if necessary, convert the new server to the model profile required.
This step requires a separate process, training, and license keys. Contact Hitachi
Support Connect if the incorrect model arrives for replacement.
11. Navigate to Home > Server Settings > Firmware Package Management to verify
and, if necessary, upgrade the new server to the latest SU release.
12. Navigate to Home > Server Settings > Configuration Backup & Restore, select the
backup file you want, and click restore to restore the system from that backup file.
Appendix A: Server replacement procedures
Hitachi NAS Platform 3080 and 3090 G2 Hardware Reference
Configuring the replacement server
92
Advertisement
Table of Contents
