Table of Contents
Advertisement
14. Reboot the server.
15. Reconnect the data cables to the server.
Finalizing and verifying the replacement server configuration
The Fibre Channel (FC) link speed varies according to the server model. Use the
appropriate speed for your model.
HNAS 3080 and 3090
On the replacement server:
Note: The following steps show the FC link speed as 8 Gbps as an example.
Procedure
1. Navigate to Home > Server Settings > License Keys to load the license keys.
2. Remove the previous license keys in the backup file, and add the new keys.
3. Use fc-link-speed to verify and, if necessary, configure the FC port speed as
required.; for example:
a. Enter fc-link-speed to display the current settings.
host:$ fc-link-speed
FC 1:
FC 2:
Hitachi NAS Platform 3080 and 3090 G2 Hardware Reference
Finalizing and verifying the replacement server configuration
Model
4 Gbps
4 Gbps
4 Gbps
Appendix A: Server replacement procedures
Fibre Channel link speed
85
Advertisement
Table of Contents
