Finalizing And Verifying The Replacement Server Configuration - Hitachi 3090 G2 Hardware Reference Manual

13. Reboot the server.
14. Reconnect the data cables to the server.
15. To uninstall the embedded SMU, log in as root and issue the command: smu-
uninstall
16. Navigate to Home > Server Settings > License Keys to load the license keys.
17. Remove the previous license keys and add the new keys.

Finalizing and verifying the replacement server configuration

The Fibre Channel (FC) link speed varies according to the server model. Use the
appropriate speed for your model.
HNAS 3080 and 3090
On the replacement server:
Note: The following steps show the FC link speed as 8 Gbps as an example.
Procedure
1. Navigate to Home > Server Settings > License Keys to load the license keys.
2. Remove the previous license keys in the backup file, and add the new keys.
3. Use fc-link-speed to verify and, if necessary, configure the FC port speed as
required.; for example:
Hitachi NAS Platform 3080 and 3090 G2 Hardware Reference
Finalizing and verifying the replacement server configuration
Model
4 Gbps
Appendix A: Server replacement procedures
Fibre Channel link speed
93