Table of Contents
Advertisement
Procedure
1. Log in to the server.
2. Run the nas-preconfig script.
3. Reboot if you are instructed to by the script.
4. Log in to the SMU using one of the IP addresses you obtained.
5. Use a KVM (keyboard, video, and mouse) or a serial cable to connect to the serial
port on the server.
Alternatively, you can connect by way of SSH using the following settings:
115,200 b/s
■
8 data bits
■
1 stop bit
■
No parity
■
No flow control
■
VT100 emulation
■
6. Log in as root (default password: nasadmin), and enter ssc localhost to access
the BALI level command prompt.
7. Enter evs list to obtain the IP configuration for the server.
8. Using a supported browser, launch the NAS Manager using either of the IP
addresses acquired from the EVS list output.
9. Click Yes, and log in as admin (default password: nasadmin).
10. Verify and, if necessary, convert the new server to the model profile required.
This step requires a separate process, training, and license keys. Contact Hitachi if
the incorrect model arrives for replacement.
11. Navigate to Home > SMU Administration > Upgrade SMU to verify and, if
necessary, upgrade the embedded SMU to the latest SMU release.
12. Navigate to Home > Server Settings > Firmware Package Management to verify
and, if necessary, upgrade the new server to the latest SU release.
13. Navigate to Home > Server Settings > Configuration Backup & Restore, select the
desired backup file, and click restore to restore the system from that backup file.
Appendix A: Server replacement procedures
Hitachi NAS Platform 3080 and 3090 G2 Hardware Reference
Configuring the replacement server
84
Advertisement
Table of Contents
