Document Revision History; Related Documents - ABB Relion SAM600 Installation Manual

Switchgear control unit

Hide thumbs Also See for Relion SAM600:

Applications manual (92 pages)

Communication protocol manual (62 pages)

Table Of Contents

Table of Contents

Section 1

Introduction

sequence for the engineering of protection and control functions, as well as communication

engineering for IEC 61850.

The installation manual contains instructions on how to install the IED. The manual provides

procedures for mechanical and electrical installation. The chapters are organized in the

chronological order in which the IED should be installed.

The commissioning manual contains instructions on how to commission the IED. The manual

can also be used by system engineers and maintenance personnel for assistance during the

testing phase. The manual provides procedures for the checking of external circuitry and

energizing the IED, parameter setting and configuration as well as verifying settings by

secondary injection. The manual describes the process of testing an IED in a substation which

is not in service. The chapters are organized in the chronological order in which the IED should

be commissioned. The relevant procedures may be followed also during the service and

maintenance activities.

The operation manual contains instructions on how to operate the IED once it has been

commissioned. The manual provides instructions for the monitoring, controlling and setting of

the IED. The manual also describes how to identify disturbances and how to view calculated

and measured power grid data to determine the cause of a fault. The manual provides

information related to the need of LHMI service kit to monitor diagnostics and make

configuration changes.

The application manual contains application descriptions and setting guidelines sorted per

function. The manual can be used to find out when and for what purpose a typical protection

function can be used. The manual can also provide assistance for calculating settings.

The technical manual contains operation principle descriptions, and lists function blocks, logic

diagrams, input and output signals, setting parameters and technical data, sorted per

function. The manual can be used as a technical reference during the engineering phase,

installation and commissioning phase, and during normal service.

The communication protocol manual describes the communication protocols supported by

the IED. The manual concentrates on the vendor-specific implementations.

The cyber security deployment guideline describes the process for handling cyber security

when communicating with the IED. Certification, Authorization with role based access control,

and product engineering for cyber security related events are described and sorted by

function. The guideline can be used as a technical reference during the engineering phase,

installation and commissioning phase, and during normal service.

1.3.2