Section 5
Mounting
5.3.2
Wall mounting
5.3.2.1
Overview
All case sizes, 1/2 x 19" and 1/1 x 19", can be wall mounted. It is also possible to mount the IED
on a panel or in a cubicle.
5.3.2.2
Mounting procedure for wall mounting
IEC17000054 V1 EN-US
Figure 4:
18
Use only the screws included in the mounting kit when mounting the plates and
the angles on the IED. Screws with wrong dimension may damage the PCBs
inside the IED.
2
1
Wall mounting details.
The required torque for screws is 3.5 Nm and for nuts is 4.5 Nm.
© Copyright 2017 ABB. All rights reserved
3
4
5
6
IEC17000054-1-en.vsdx
Switchgear control unit SAM600-IO
1MRK 514 030-UEN B
IP10316-1 v1
M11973-3 v7
M11949-2 v3
Installation manual