1MRK 514 030-UEN B
Section 2
2.1
Symbols on the product
2.2
Warnings
Observe the warnings during all types of work related to the product.
Switchgear control unit SAM600-IO
Installation manual
Safety information
All warnings must be observed.
Read the entire manual before doing installation or any maintenance work on
the product.
Class 1 Laser product. Take adequate measures to protect your eyes and do not
view directly with optical instruments.
Only electrically skilled persons with the proper authorization and knowledge of
any safety hazards are allowed to carry out the electrical installation.
National and local electrical safety regulations must always be followed.
Working in a high voltage environment requires serious approach to avoid
human injuries and damage to equipment.
Do not touch circuitry during operation. Potentially lethal voltages and currents
are present.
Always use suitable isolated test pins when measuring signals in open circuitry.
Potentially lethal voltages and currents are present.
Never connect or disconnect a wire and/or a connector to or from a IED during
normal operation. Hazardous voltages and currents are present that may be
lethal. Operation may be disrupted and IED and measuring circuitry may be
damaged.
© Copyright 2017 ABB. All rights reserved
Section 2
Safety information
GUID-E48F2EC3-6AB8-4ECF-A77E-F16CE45CA5FD v4
IP1504-1 v2
GUID-C9B6638A-57E7-4E05-9A33-A60E359C54AF v1
M2366-2 v2
M2362-2 v1
M2364-2 v1
M2370-2 v1
7