Table of Contents
Advertisement
Print Functions
The standard print function gives the user the opportunity to send the data displayed on the R-2600 CRT display
to a printer. When the cPR1, key is selected on the front panel, the data is sent over the RS-232 serial bus in
ASCII format. With the standard print function, only the text information is printed, the scope trace data is not
printed.
graphics data. If the user's printer is capable of IBM-EPSON graphics, all of the data displayed on the CRT will be
printed, including the scope Uace.
The Graphics Control Command Sequence to implement 8-pin Bit Image Mode Graphics is as follows:
Where: ESC =
A
=
8
L
=
Motorola Commuuications Analyzer
Programming Reference
Printer Initialization.
Line Space Setting
Dot Density, number of columns of dots per line
ASCII Escape Character 1B (Hexidecimal)
Printer Lnitialization
Line Space Setting
Dot Density Designation = Double Density
number of columns of dots on a line = 0,2
The printfunction is
8
Note
available on the R-2550.
Advertisement
Table of Contents
