Table of Contents
Advertisement
Command Descriptions
Each command or query is described on a page with specific information content. The general form of each
manual entry is shown in the following example.
HEADER
Description:
Query Syntax:
Standard RS-232
Response Syntax:
IEEE 488.2
Response Syntax:
Parameters:
The Optional and
field is replaced with the Power-On
commands. The Power-On jield describes the parameter values when power is initially applied
to the analyzer.
Provides a brief description of the command or query.
Defines the expected format of the input command or query. The syntax is identical for
all three modes: Standard and Extended
RS-232 and IEEE 488.2.
Defines the format of the response message when the analyzer is operating in the
Standard RS-232 mode. This entry is only provided for queries.
Defines the format of the response message when the analyzer is operating in the
Extended RS-232 mode for the R-2550, or either the Extended RS232 or IEEE 488.2
mode for the R-2600. This entry is only provided for queries.
Description:
Numeric parameter name
optional:
Is the parameter optional
Type:
Parameter type per IEEE 488.2
units:
Units of the parameter
Resolution:
Range:
Range of values the numeric may take on
Reset:
Value of parameter after reset
Description:
String parameter name
optional:
Is the parameter optional
Type:
Parameter type per IEEE 488.2
Format:
Format of the parameter
Value of parameter after reset
Reset:
Notes:
Describes any special requirements or features of the
command or query.
fields are not used in the definition of a response parameter. The Reset
field
Note
for values that are not reset by the *RST, FP, or FR
Motorola Communications Analyzer
27
Command/Query Description
Programming Reference
Advertisement
Table of Contents
