Motorola R-2550 Programming Reference Manual page 229

PS (R-2670)
Description:
Command Syntax:
Parameters:
PS command restores the operating values saved in the selected preset. The set of
The
operating parameters restored by this command are:
Monitor Frequency
Generate Frequency
Modulation Type
Bandwidth
Duplex Offset
Synthesizer Format Selection
DTMF Code
PS nl
Description: Preset Selection
optional: Yes
Type:
None
units:
Resolution:
Range: 0 through 44
0
Reset:
Preset selections 0 through 29 are not availabLe when the R-2670 mode is selected to be
Trunk
Preset selections 30 through 44 will save the entire state of the analyzer.
Restore Selected Preset From Memory
Motorola Communications Analyzer
13 Trunking Option Programming Reference