PM (R-2670)
Description:
Command Syntax:
Parameters:
Notes:
Motorola Communications Analyzer
The PM command saves selected parameters of the current state of the analyzer into the
specified preset. The set of operating parameters saved by this command are:
Monitor Frequency
Generate Frequency
Modulation Type
Bandwidth
Synthesizer Format Selection
DTMF Code
PM
Preset Selection
Description:
optional:
Yes
Type:
units:
None
N/A
Resolution:
0 through 44
Range:
0
Reset:
Preset selections 0 through 29 are not available when the R-2670 mode is selected to be
Trunk
Reset selections
through 44 will save the entire state of the analyzer.
30
Save Selected Preset to Memory
12