Communication Profile - ABB Relion SAM600 Communication Protocol Manual

1MRK 511 441-UEN Rev. C
Section 4
The IEC 61850 standard is conceptually written to be independent of an existing communication
media and message transmission concept. Out of this, a specific communication profile is decided
and has been commonly used. The profile contains:
• Ethernet as the media
• TCP/IP
• ISO session and presentation layer
• MMS (Manufacturing Message Specification (ISO 9506-1 and ISO 9506-2)
The IEC 61850 standard describes its requested services in ACSI, which is contained in part 7-2 of
the standard. The mapping to the MMS for all aspects of services and Ethernet usage is specified in
part 8-1 of IEC 61850.
Each device manufacturer, which is a partner of an IEC 61850 based communication network, has to
take these two specifications and adapt their respective product to the requirements and definitions
given in the standard. To make this profile visible to all other partners, so they can check what they
can expect and what they have to support, the PICS document is defined. The PICS contains in a
table based form the possibility of a product or product family.
- Access Point (AP) / Address
- GSE
IEC08000179 V1 EN-US
Figure 6:
Switchgear control unit SAM600-IO
Communication protocol manual

Communication profile

IED (client)
(61850 services; part 7-2)
- Access Point (AP) / Address
- GSE
Communication
(MMS services; part 8-1)
Communication
(MMS services; part 8-1)
IED (server)
(61850 services; part 7-2)
IEC 61850 Protocol: related standards for communication
© 2017 - 2021 Hitachi Power Grids. All rights reserved
AP
Subnetwork
Communication
(MMS services; part 8-1)
- Access Point (AP) / Address
- GSE
IED (server)
(61850 services part; 7-2)
IEC08000179.vsd
Section 4
Communication profile
GUID-25495333-A2B7-44A7-908D-68EC06694AD5 v7
19