NEC Express5800/R120e-1M Instruction Manual page 126

Chapter 3 Appendix
Error Message
A015 Memory Error detected in
CPU2_DIMM9
A016 Memory Error detected in
CPU2_DIMM10
A017 Memory Error detected in
CPU2_DIMM11
A018 Memory Error detected in
CPU2_DIMM12
Online Spare Memory was not
A420
ready.
Mirroring Memory was not
A421
ready.
Lockstep was not ready.
A423
Memory not detected
A800
Latest memory module is
A804
corrupted.
AE01 CPU1_DIMM1 has been
disabled.
AE02 CPU1_DIMM2 has been
disabled.
AE03 CPU1_DIMM3 has been
disabled.
AE04 CPU1_DIMM4 has been
disabled.
AE05 CPU1_DIMM5 has been
disabled.
AE06 CPU1_DIMM6 has been
disabled.
AE07 CPU1_DIMM7 has been
disabled.
AE08 CPU1_DIMM8 has been
disabled.
AE09 CPU1_DIMM9 has been
disabled.
AE0A CPU1_DIMM10 has been
disabled.
AE0B CPU1_DIMM11 has been
disabled.
AE0C CPU1_DIMM12 has been
disabled.
AE0D CPU2_DIMM1 has been
disabled.
AE0E CPU2_DIMM2 has been
disabled.
AE0F CPU2_DIMM3 has been
disabled.
126
Cause
An error was detected in
CPU2_DIMM9.
An error was detected in
CPU2_DIMM10.
An error was detected in
CPU2_DIMM11.
An error was detected in
CPU2_DIMM12.
Memory Sparing feature is
disabled in this memory
configuration.
Memory Mirroring feature is
disabled in this memory
configuration.
Memory LockStep feature is
disabled in this memory
configuration.
No valid memory is installed.
Failure on BIOS Flash ROM
was detected.
A memory error was detected.
CPU1_DIMM1 has been
disabled.
A memory error was detected.
CPU1_DIMM2 has been
disabled.
A memory error was detected.
CPU1_DIMM3 has been
disabled.
A memory error was detected.
CPU1_DIMM4 has been
disabled.
A memory error was detected.
CPU1_DIMM5 has been
disabled.
A memory error was detected.
CPU1_DIMM6 has been
disabled.
A memory error was detected.
CPU1_DIMM7 has been
disabled.
A memory error was detected.
CPU1_DIMM8 has been
disabled.
A memory error was detected.
CPU1_DIMM9 has been
disabled.
A memory error was detected.
CPU1_DIMM10 has been
disabled.
A memory error was detected.
CPU1_DIMM11 has been
disabled.
A memory error was detected.
CPU1_DIMM12 has been
disabled.
A memory error was detected.
CPU2_DIMM1 has been
disabled.
A memory error was detected.
CPU2_DIMM2 has been
disabled.
A memory error was detected.
CPU2_DIMM3 has been
disabled.
Express5800/R120e-1M, R120e-2M Maintenance Guide
Solution
Contact your sales representative.
Confirm the setting for [Memory RAS Mode] in
SETUP. If Memory Sparing, Memory Mirroring, or
memory LockStep feature is enabled and DIMM
is degraded, this POST error is displayed.
Run SETUP, change parameter for [Memory
Retest] to [Yes], then execute [Save Changes
and Exit].
If the same error persists, contact your service
representative.
Check if DIMMs are properly installed. If the same
message appears repeatedly, contact your
service representative.
Contact your sales representative.
1. POST Error Message