Table of Contents
Advertisement
Chapter 1 Maintenance
•
Clearing a password
1. See "Getting Started" provided with this server or Chapter 2 (1. Installing Internal Optional Devices) in
"User's Guide" to remove Top Cover.
2. Confirm the position of Clear Password Jumper.
3. Change the jumper switch to the Clear position.
4. Close Top Cover and press POWER Switch.
5. POST halts with the following error message.
ERROR
8007: Password Cleared By Jumper.
Press<F1> to resume, <F2> to Setup
6. Press <F2> key to start BIOS Setup Utility and then change the password. Run [Save Changes and
Exit] after setting.
7. Turn off the power and return the jumper switch to the Protect position by following steps 1 and 2.
8. Close Top Cover.
Express5800/R120e-1M, R120e-2M Maintenance Guide
7. Resetting and Clearing the Server
51
Advertisement
Table of Contents
