Table of Contents
Advertisement
Chapter 2 Convenient Features
For details about the options, see the table below.
Serial Port A Settings
Serial Port A
Serial A Base I/O
Serial A Interrupt
Serial Port B Settings
Serial Port B
Serial B Base I/O
Serial B Interrupt
Console Redirection Settings
BIOS Redirection Port
Terminal Type
Baud Rate
Data Bits
Parity
Stop Bits
Flow Control
Continue C.R. after POST
76
Option
Disabled
[Enabled]
[3F8h]
2F8h
3E8h
2E8h
[IRQ 4]
IRQ 3
Disabled
[Enabled]
3F8h
[2F8h]
3E8h
2E8h
IRQ 4
[IRQ 3]
[Disabled]
Serial Port A
Serial Port B
[VT100+]
VT-UTF8
PC-ANSI
9600
19200
57600
[115200]
7
[8]
[None]
Even
Odd
[1]
2
None
[Hardware RTS/CTS]
Disabled
[Enabled]
Express5800/R120e-1M, R120e-2M Maintenance Guide
Parameter
−
Enable or disable serial Port A
Specify the base I/O address for serial port A.
Specify the interrupt for serial port A
−
Enable or disable serial Port B
Specify the base I/O address for serial port B
Specify the interrupt for serial port B
−
Enable or disable the console redirection
feature for the specified serial port. Specifying
[Serial Port A] or [Serial Port B] allows direct
connection via terminal unit such as NEC
ESMPRO Manager, and options for
connection shown below are displayed.
Select the terminal type.
Specify baud rate.
Specify data bit width.
Specify parity type.
Specify stop bits.
Specify the flow control method.
Select whether the console redirection is
continued after completion of POST or not.
1. System BIOS
Descriptions
−
−
−
[
]: Factory setting
Advertisement
Table of Contents
