NEC Express5800/R120e-1M Instruction Manual page 128

Chapter 3 Appendix
Error Message
AE8C CPU1_DIMM12 with error is
enabled.
AE8D CPU2_DIMM1 with error is
enabled.
AE8E CPU2_DIMM2 with error is
enabled.
AE8F CPU2_DIMM3 with error is
enabled.
AE90 CPU2_DIMM4 with error is
enabled.
AE91 CPU2_DIMM5 with error is
enabled.
AE92 CPU2_DIMM6 with error is
enabled.
AE93 CPU2_DIMM7 with error is
enabled.
AE94 CPU2_DIMM8 with error is
enabled.
AE95 CPU2_DIMM9 with error is
enabled.
AE96 CPU2_DIMM10 with error is
enabled.
AE97 CPU2_DIMM11 with error is
enabled.
AE98 CPU2_DIMM12 with error is
enabled.
B000 Expansion ROM not
initialized
B001 Expansion ROM not
initialized - PCI Slot 1B
B002 Expansion ROM not
initialized - PCI Slot 2B
B003 Expansion ROM not
initialized - PCI
Slot 1C
B004 Expansion ROM not
initialized - PCI
Slot 2C
B005 Expansion ROM not
initialized - PCI
Slot 3C
128
Cause
An error in CPU1_DIMM12 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
An error in CPU2_DIMM1
occurred, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
An error in CPU2_DIMM2 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
An error in CPU2_DIMM3 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
An error in CPU2_DIMM4 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
An error in CPU2_DIMM5 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
An error in CPU2_DIMM6 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
An error in CPU2_DIMM7 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
An error in CPU2_DIMM8 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
An error in CPU2_DIMM9 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
An error in CPU2_DIMM10 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
An error in CPU2_DIMM11 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
An error in CPU2_DIMM12 was
detected, but because all
memory is currently disabled,
this DIMM was forcibly enabled.
Failed to expand option ROM.
Option ROM expansion in PCI
slot 1B failed.
Option ROM expansion in PCI
slot 2B failed.
Option ROM expansion in PCI
slot 1C failed.
Option ROM expansion in PCI
slot 2C failed.
Option ROM expansion in PCI
slot 3C failed.
Express5800/R120e-1M, R120e-2M Maintenance Guide
Solution
Contact your sales representative.
Disable expansion of option ROM of the board
that is not used for OS boot.
Disable expansion of option ROM of the option
board that is not used for OS boot.
Run SETUP, and select Advanced → PCI
Configuration → PCI Device Controller and
Option ROM Settings → PCIxx Slot Option
ROM → Disabled. (xx: PCI slot number)
1. POST Error Message