Toshiba LF620F Instruction Manual page 91

You can check or change the preset count as described below.
The following is an example to change the preset count value from 500 (count) to 1000 (count).
Switch operation
STEP1
STEP2
STEP3
STEP4(=END)
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Display example
K:PRESET C
Select "PRST VAL" from the setting item
1 PRST VAL
selection menu.
2 OUT MODE
3 EXIT
ESC
PRST VAL
The currently set value (500 in this
example) appears.
00000500
Then push
ESC
PRST VAL
The switches at the bottom change.
(
00000500
At the same time, the cursor appears.
PRST VAL
Push
digit you want to change and push
00001000
to change the number of the digit.
PRST VAL
When you push
to confirm whether the setting is OK or not.
00001000
If OK, push
setting, push
SET OK?
Pushing
and exits the setting screen.
O K
ESC N O
－ 90 －
6 F 8 A 0 9 2 8
Description
.
are shown.)
to move the cursor to the
, a message appears
O K
. If you want to redo the
.
N O
ESC
cancels the setting operation