Zanussi ZS12V70CCHI Service Manual page 52

Steps Procedure
Removal of electric box assy
Firstly, remove the front case properly. Then screw off the electric box
cover.
Remove the pipe sensor and ambient sensor located on evaporator
from their housing and screw off the earthing cable.
Control panel ( electric ) box is fixed to the indoor unit with screws.
Remove this screws with a proper tool. Push towards the rear and let
the box get rid of the rear body connecting tab.
2 screws for 12K front panels
4 screws for 18/24K front panels
Removal of evaporator
12K
Firstly, remove the screw located in the rear body.
Remove the screw connecting the evaporator with the electric box.
Remove the tabs on evaporator plastic on left side the product.
Move the evaporator forward and remove it from the rear body. Then,
you can remove the evaporator by raising.
52