Inspecting The Verticutter; Installing The Transport Rollers - Toro Reelmaster 7000-D Operator's Manual

Note:
Determine the left and right sides of the
machine from the normal operating position.
1

Inspecting the Verticutter

Parts needed for this procedure:
1 Verticutter
Procedure
After the verticutter is removed from the box, inspect
the following:
1. Check each end of the reel for grease. Grease
should be visibly evident in the reel bearings and
in the internal splines of the reel shaft.
2. Ensure that all hardware is securely tightened.
3. Make sure that the carrier frame suspension
operates freely and does not bind when moved
back and forth.
2
Installing the Transport
Rollers
Parts needed for this procedure:
2 Transport roller assembly
2 Cotter pin
Procedure
Secure a transport roller bracket to each side plate pin
with a cotter pin (Figure
1. Cotter pin
Note:
The roller should be positioned to the rear of
the verticutter.
6
3).
Figure 3
2. Transport roller assembly
g313795