Product Overview
Specifications
Net weight
Attachments/Accessories
A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
64 kg (140 lb)
9
Operation
Training Period
Before operating the verticutter reels, evaluate the
performance of the reel at the desired setting. Operate
in a clear, unused area to determine whether the
desired results will be achieved. Make adjustments as
necessary.
Adjusting the Verticutter
Adjusting the Blade Depth
Note:
The maximum recommended blade
penetration depth is 6 mm (1/4 inch).
1.
Place the verticutter reel on a level surface.
2.
Place 2 gauge bars, which have the desired
depth of blade penetration below the ground,
under the front and rear rollers of the verticutter
reel (on each end of the reel)
1. Gauge bars
Note:
The verticutter blades must not touch the
gauge bars.
3.
Turn the adjusting bolt on each height-of-cut
bracket
(Figure
8) so that the verticutter blades
come in contact with the level surface on both
ends.
Note:
As the verticutter blades wear, the
diameter of the reel decreases and the depth
setting changes. Check the depth setting
periodically to ensure that the desired setting is
achieved.
(Figure
8).
Figure 8
2. Adjusting bolts
g195549