Operating The Parking Brake; Operating The Mower Blade-Control Switch (Pto); Operating The Throttle With Horizon™ Technology - Toro 74947 Operator's Manual

Operating the Parking
Brake
Always engage the parking brake when you stop the
machine or leave it unattended.
Engaging the Parking Brake
WARNING
The parking brake may not hold the machine
parked on a slope and could cause personal
injury or property damage.
Do not park on slopes unless the wheels are
chocked or blocked.
Figure 15
Disengaging the Parking Brake
Figure 16
Operating the Mower
Blade-Control Switch (PTO)
The blade-control switch (PTO) starts and stops the
mower blades and any powered attachments.
Engaging the Blade-Control
Switch (PTO)
Note:
Engaging the blade-control switch (PTO) with
the throttle position at half or less causes excessive
wear to the drive belts.
Disengaging the Blade-Control
Switch (PTO)
g027334
Operating the Throttle with
Horizon™ Technology
g027335
There are 3 positions that the throttle switch can
operate at—Max, Economy, and Low
From the E
CONOMY
the front of the switch to place the throttle into the
M position
AXIMUM
From the E
CONOMY
back of the switch to place the throttle into the L
position (Figure
21
Figure 17
Figure 18
(middle) position, push down
(Figure 19).
(middle) position, push down the
19).
g008945
g009174
(Figure 19).
OW