Toro 74947 Operator's Manual page 42

5. Slowly pour approximately 80% of the specified
oil into the filler tube and slowly add the
additional oil to bring it to the Full mark
51).
Figure 51
6. Start the engine and drive to a flat area.
7. Check the oil level again.
Changing the Engine-Oil Filter
Service Interval: Every 200 hours (more often in dirty
(Figure
1. Drain the oil from the engine; refer to
the Engine Oil (page
2. Change the engine-oil filter
g194610
Note:
the engine, and then the oil filter an extra 3/4
turn.
3. Fill the crankcase with the proper type of new
oil; refer to
42
or dusty conditions).
41).
(Figure
Figure 52
Ensure that the oil-filter gasket touches
Changing the Engine Oil (page
Changing
52).
g008804
g027477
41).