Silvercrest 425056 2301 Operating Instructions Manual page 12

Cleaning
WARNING! RISK OF ELECTRIC SHOCK!
► Before you start to clean the hand blender, ALWAYS unplug the appliance
from the mains power socket.
Under no circumstances may the motor unit 4 be cleaned by immersing it in
water or holding it under running water.
NOTICE
WARNING! PROPERTY DAMAGE!
► Do not use aggressive, chemical or abrasive cleaning agents! They could
irreparably damage the upper surfaces!
1) Disconnect the power cable.
2) Clean the motor block 4 and the whisk holder 6 with a moist cloth.
Ensure that water cannot permeate through the openings on the motor block 4.
For stubborn stains, put some mild detergent on the cloth. Wipe detergent
residues off with a damp cloth.
3) Clean the hand blender 5, the whisk 7 and the measuring beaker with
combined lid/stand 8 thoroughly in washing-up water and then remove any
detergent residue with fresh water.
4) Dry everything well with a dish towel and ensure that the appliance is
completely dry before re-use.
SSMS 600 E5
The measuring beaker 8 and whisk 7 are dishwasher-safe.
GB │ IE │
9 ■