Table of Contents
Advertisement
7. Fasten the signal cable in the cable gland
of 3 Nm.
8. Insert the shielding plate
9. Close the door of the wall-mounted device and tighten the six screws
of 2 Nm.
8.2.4.1
Overview conduit connectors
Overview conduit connectors
①
②
③
④
⑤
⑥
Wall-mounted device
Operating Instructions, 07/2023, A5E31930403-AB
②
Flat Gasket
Clamp Connection Conduit
Adapter M32x1-NPT1
Blind Plug NPT1
Locknut M32
Hex Nut ISO 4032-M4 A2K
③
. To do this, tighten the union nut with a torque
in the wall-mounted device again and fasten it with screws.
Connecting the device
8.2 Electrical connections
①
again with a torque
109
Advertisement
Table of Contents
