Physically Mount The Product; Mount The Product On A Flat Surface - Fujitsu BroadOne LS110 Residential Femtocell User Manual

User Guide
Installation and Setup

Physically Mount the Product

9.1
Physically Mount the Product
In this section:
9.1.1

Mount the Product on a Flat Surface

9.1.2 Mount the Product on a Wall
Important: For stability, the product should always be mounted using the supplied stand. When
+
choosing a location, ensure that all necessary wired connections, including the power supply, can be
plugged into the product.
9.1.1
Mount the Product on a Flat Surface
To mount the product on a flat surface:
Step 1
Place the stand on a flat surface. If desired, the stand can be attached to the surface using two screws
(not included).
Step 2
Align the mounting slots on the bottom of the product with the corresponding slots on the top of the
stand.
BroadOne LS110 Residential
Femtocell
Release 14 Issue 1, May 2015
FNC-LS110-0014-100
Fujitsu and Fujitsu Customer Use Only
Page 16