Connect The Product To A Lan Port - Fujitsu BroadOne LS110 Residential Femtocell User Manual

User Guide
Installation and Setup

Connect the Product to a LAN Port

9.2
Connect the Product to a LAN Port
Using a LAN cable, connect the WAN port on the product to the LAN port used for your Internet connection. If your
PC is currently connected to the LAN port, simply disconnect the cable from your PC and reconnect it to the WAN
port on the product. When finished, the product should be connected as illustrated in one of the scenarios
illustrated below:
Internet
Connection
Modem/Router/ONU
Figure 1: Internet Connection through Modem, Wireless Router, or ONU
Internet
Connection
Modem/Router/ONU
Figure 2: Internet Connection through Wired Router
BroadOne LS110 Residential
Femtocell
Release 14 Issue 1, May 2015
FNC-LS110-0014-100
Connect to
the LAN port.
LAN Cable
Connect to the WAN
port of the product.
Connect to
the LAN port.
LAN Cable
Wired Router
Connect to the WAN
port of the product.
Fujitsu and Fujitsu Customer Use Only
Page 19