Mount The Product On A Wall - Fujitsu BroadOne LS110 Residential Femtocell User Manual

User Guide
Installation and Setup
Physically Mount the Product
Step 3
Slowly slide the product onto the stand until you feel it click into place.
9.1.2

Mount the Product on a Wall

To mount the product on a wall:
Step 1
Attach the stand to the wall using the appropriate mounting hardware (not supplied), ensuring that
the arrow on the stand base is pointing straight up (see photo below) and that the stand is level:
• If attaching directly to a wooden or plywood wall, use two #6 x 1 in. wood screws. If attaching to
wall studs, use two #6 x 1-1/2 in. or #6 x 2 in. wood screws instead.
• If attaching to drywall, use two #6 screws and drywall anchors capable of supporting 12 lbs or more.
Screws and anchors can be bought as a set (for example, E-Z Ancor
and screws) from any home-improvement store.
• If attaching to concrete, ensure that appropriate screws and anchors are used.
Step 2
Aligning the slots on the back of the product with the corresponding hooks on the stand, slide the
product onto the stand, and push down firmly.
Warning: Do not let go of the product until you are absolutely sure that it is securely fastened.
BroadOne LS110 Residential
Femtocell
Release 14 Issue 1, May 2015
FNC-LS110-0014-100
Fujitsu and Fujitsu Customer Use Only
® ™
Twist-N-Lock drywall anchors
Page 17