Table of Contents
Advertisement
User Guide
Page 22
Installation and Setup
Connect the AC Adapter
9.4
Connect the AC Adapter
The product does not have a power button. To turn on the product, connect the supplied AC adapter to the
product and a power outlet as shown below. Plugging the AC adapter into a surge/spike protector or UPS
(uninterruptible power supply) is recommended.
Before doing so, please observe the following precautions to avoid damage to the product or AC adapter:
• Use only the supplied AC adapter. Do not use an AC adapter from another product.
• Do not bend or kink the AC adapter cord, and do not pull on the cord.
• Do not bundle the AC adapter cord with the LAN cable.
• Do not place heavy objects on the AC adapter or cord.
• To avoid accidentally damaging the cord, plug the AC adapter power plug into an outlet near the product to
keep the amount of exposed cord to a minimum, and ensure that the exposed cord is always visible.
The product initializes automatically when powered on. Initialization takes approximately 3 minutes. When
initialization is complete, proceed to the next step to perform initial setup.
BroadOne LS110 Residential
Fujitsu and Fujitsu Customer Use Only
Femtocell
Release 14 Issue 1, May 2015
FNC-LS110-0014-100
Advertisement
Table of Contents
