Fujitsu BroadOne LS110 Residential Femtocell User Manual page 26

User Guide
Installation and Setup
Perform Initial Setup
Hint: While making changes, if at any time you want to reset all fields to their default values, click
Init. To save those values, click Apply.
Step 6
When finished, click Apply.
The product restarts to apply the new settings.
Step 7
Wait for the product to restart.
After the product turns on, it will take a few minutes for the ACTIVE LED to turn green after the product
turns on. If the ACTIVE LED turns green, the initial setup is complete, and the product is connected to
the 4G LTE network.
If the ACTIVE LED does not turn green after several minutes, perform the following steps:
a) Unplug the AC adapter from the product, reconnect the AC adapter, and wait a few minutes.
b) Turn off the modem/router/ONU, wait for approximately 30 minutes, and then check again.
c) If the ACTIVE LED still does not turn green, contact customer service.
Step 8
Confirm that your smartphone or tablet is registered to the product.
Note: The procedure for confirming registration varies by device and service provider. Please consult your
device's user manual.
Step 9
Confirm the Internet Connection by opening a Web browser on your smartphone or tablet and going to
any Web address.
BroadOne LS110 Residential
Femtocell
Release 14 Issue 1, May 2015
FNC-LS110-0014-100
Fujitsu and Fujitsu Customer Use Only
Page 26