Cleaning The Trimmer Blade - Brother ScanNCut DX Manual

Cleaning the Trimmer Blade

If material debris, lint or dust accumulates inside the trimmer
blade, it may no longer cut material. Periodically clean the
trimmer blade.
Memo
• Do not disassemble the trimmer blade.
a
Remove the trimmer blade from the trimmer.
• For details, refer to the procedure in "Removing the Trimmer
Blade" on page 26.
b
Using a commercially available brush, clean off debris,
lint and dust.
c
Install the trimmer blade onto the trimmer.
• For details, refer to the procedure in "Installing the Trimmer
Blade" on page 27.
28