Chapter 2 Preparations
Installing the flash backup unit
1.
Remove one screw from the front panel bracket.
2.
Slide the front panel bracket slightly toward the right, and then pull the bracket toward the front to
remove it.
3.
Install the flash backup unit to this server with one screw and fixing bracket provided with the
flash backup unit.
Important
Be careful that the cable does not come out from the connector when pulling
the front panel bracket.
Screw
Express5800/T110i-S User's Guide
1. Installing Internal Optional Devices
Insert the two hooks
of the anchoring
bracket into the
holes on the front
panel bracket.
49