Chapter 2 Preparations
The jumper on motherboard to be configured when using internal simple UPS is shown in figure below.
(a)
Using internal simple UPS
When using N8181-152 internal simple UPS, set jumper (BIOS OR) on the motherboard to Enabled.
Jumper on the motherboard (BIOS OR)
Enabled: Set to 2-3
(b)
Not using internal simple UPS
Jumper on the motherboard (BIOS OR)
Disabled: Set to 1-2
80
Motherboard
Express5800/T110i-S User's Guide
1. Installing Internal Optional Devices
3 2 1
3 2 1
Disabled
Enabled
BIOS OR